全息模拟再现像的三维重构

提出一种全息模拟再现像的三维重构方法，可以模拟再现得到三维再现像.计算机模拟再现许多幅在不同深度位置的二维光强分布；利用灰度级变化的聚焦度评价方法，通过寻找最大聚焦度值，确定再现三维像各像点的深度信息.实验证明,该方法能实现模拟再现像的三维重构，使数字全息术有希望成为一种全新的三维面形检测技术.再现像三维重构的实现可以更客观地对全息图进行像质评价，并验证计算机制全息术算法的正确性.     

脉冲磁场处理对碳纳米管掺杂MgB2线材临界电流密度的影响

对碳纳米管(CNT)掺杂MgB₂超导体磁场处理后的行为进行了研究. 结果表明，CNT掺杂MgB₂超导体经5T脉冲磁场处理后临界电流密度J_c(H)在低磁场下提高了2—3倍，高场下提高一个数量级以上，扫描电镜结果显示CNT沿着处理磁场方向规则排列并且成为MgB₂基体的形核中心和高效的磁通钉扎中心. 关键词： 2')" href="#">MgB₂ 碳纳米管 脉冲磁场处理     

Crystal field analysis of the magnetization curves of R2Fe17 and R2Fe17H3 (R=Tb,Ho,Er)

In this paper the values of the crystalline-electric-field parameters A_nm for R₂Fe₁₇ and R₂Fe₁₇H₃ (R=Tb,Ho,Er) are evaluated by fitting calculations to the magnetization curves measured on the single crystal at several temperatures. The fitted A_nm for R₂Fe₁₇ are strikingly different from those for the corresponding R₂Fe₁₇H₃. The energy gaps between the lowest four energy levels for Ho ions in Ho₂Fe₁₇₂ can be reproduced by using the fitted A_nm and exchange field 2μ_BH_ex, which estimated from the fit of the temperature dependence of the spontaneous magnetization combined with inelastic neutron scattering experiment.     

武器系统生存能力模型分析

对抗过程中，武器系统的生存概率包括以下的四个方面，即：被发现的可能性、被命中的可能性、易毁性和可修理性。武器系统生存能力的动态描述主要划分为四个阶段：被发现阶段、被命中阶段、被毁伤和修复阶段。本文从这四个阶段给出了对抗过程中武器系统生存能力的动态描述，并分析了各个阶段的计算模型。     

退火温度对低温生长MgxZn1－xO薄膜光学性质的影响

用射频磁控溅射法在80℃衬底温度下制备出Mg_xZn_1-xO(x=0.16)薄膜，用X射线衍射(XRD)、光致发光(PL)和透射谱研究了退火温度对Mg_xZn_1-xO薄膜结构和光学性质的影响.测量结果显示，Mg_xZn_1-xO薄膜为单相六角纤锌矿结构，并且具有沿c轴的择优取向；随着退火温度的升高，(002)XRD峰强度、平均晶粒尺寸和紫外PL峰强度增大，(002)XRD峰半高宽(F 关键词： xZn_1-xO薄膜')" href="#">Mg_xZn_1-xO薄膜 射频磁控溅射 退火     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Shadowing and Inverse Shadowing for C^1 Endomorphisms

In this paper, we consider the shadowing and the inverse shadowing properties for C^1 endomorphisms. We show that near a hyperbolic set a C^1 endomorphism has the shadowing property, and a hyperbolic endomorphism has the inverse shadowing property with respect to a class of continuous methods. Moreover, each of these shadowing properties is also ＂uniform＂ with respect to C^1 perturbation.     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Wintner定理的推广与全局光滑线性化

微分方程光滑线性化的研究,目前仅限于原点近傍的小邻域,本文给出了一个全局光滑线性化的结论.全局拓扑线性化或全局光滑线性化的先决条件是任一解的存在区间为全实轴.因此,本文也讨论了Wintner定理的推广问题.     

光谱色散匀滑技术与衍射光学器件联用性能的空间频谱分析

基于空间频谱分析方法，建立了光谱色散匀滑技术(SSD: Smoothing by Spectral Dispersion)与衍射光学器件(DOE: Diffractive Optical Element)联用性能的简化分析模型，为SSD与DOE联用时，SSD参量的优化提供了理论依据.数值模拟了SSD各参量，包括脉冲时间、调制频率、位相调制系数、光栅线色散系数等对束匀滑性能的影响.模拟结果表明，SSD参量经过优化选取，且波前畸变随时间快速变化时，能获得良好的束匀滑性能.